Heating System Maintenance

Thermostats:

  • For every degree you set back your thermostat (either to a cooler temperature in the winter or a warmer one in the summer), you should see about a 2% savings on your energy bill.

  • Set your thermostat back a few degrees at night.  Ideal sleeping temperature is between 60 and 67 degrees.  Time to get out those cozy blankets!

Filters:

  • Furnaces all have filters which help keep debris and dust out of the system.

  • A clean filter will increase air flow, reduce your energy bill, and can even lengthen the life of your fan motor.

  • There are various levels of filters, in a wide range of prices, that you can choose from.

  • Inspect your filters monthly to make sure they are clear and clean. If not, replace.

  • There are three main types of filters: Disposable, Washable, & Electrostatic. See below for more information on how each of these gets cleaned or replaced.

Vents:

  • In a forced air system, you will have vents in the floor, ceiling, or walls that the warm air comes from.

  • Keep vents closed in rooms you don’t use.  Do not close vents if you have a heat pump!

 

Inspections:

  • Gas-fired equipment should be checked annually

  • Oil burners should be inspected and cleaned annually

Daily Maintenance:

  • Keep baseboards, registers, and radiators clean and clear.  Do not allow rugs, carpet, drapes or furniture to block them.

  • Make sure carpets and rugs are not too close to baseboard heaters. The area beneath these elements need to be clear so air can circulate through them.

  • Keep south-facing curtains, drapes and blinds open during the day to let sunlight in.

  • Close these same window treatments at night.

  • Turn off ventilating fans in the bathroom and kitchen once they are no longer needed.

 

**sources: peco.com and sleep.org**

Images from Dreamstime

No Comments Yet.

Leave a reply